Before resetting the preview error message contained in the LCD your printer : following ways are used to fix a printer that has the message Error E27. Error Code E27 = Waste ink absorber full or platen waste ink absorber full. You can see in the title of my previous post regarding Error Code Canon MP145/MP160.
Procedure to Reset :
Procedure to Reset :
- Turn off the printer (make sure the power cord still attached), press and hold the STOP / RESET then press and hold the ON / OFF and release the STOP / RESET, then press the STOP / RESET 2x.
- Release both buttons, the printer is now in a position SERVICE MODE (on the printer's LCD appears the number "0").
- After the lights on / off the green, please press the STOP / RESET in accordance with the following instructions :
Press 1x = Orange flame lights> for Service pattern print.
Press 2x = Green light flame> for EEPROM print.
Press 3x = Orange flame lights> for EEPROM reset.
Press 4x = Light Green Flame> to the Waste ink counter reset. - Turn the printer off and unplug the POWER.
- Turn on your printer.
Hello
ReplyDeleteIf your Epson printer is giving warning, this usually means that the printer has counted the prints it has to carry out and reached a predetermined limit. You can solve this problem by resetting the counter which will then release your printer hardware and start counting your prints from zero.
epson reset
Thank you.